"Panarea" wood burning stove 10 Kw painted steel fireplace h 88 cm Made in Italy
SKU: 2395Regular price €337,40
PANAREA represents a wood and coal stove produced in Italy and complies with current regulations.
The structure is made of high thickness steel, painted entirely with high quality Rembrantin products, resistant to high temperatures.
The ceramic glass is produced and it resists to over 1000 pieces. C.
The combustion chamber consists of a cast iron base plate (which can be removed for cleaning) and a perimeter refractory brick surface (thickness 3 cm)
- Wood stove in painted steel
- Firebox in refractory brick
- Shutter with ceramic glass resistant to high temperatures,
- Air channel
- Drawer for ash removal
- Smoke and temperature control valve
- Base in painted steel
- Maximum power 10 KW
- Hose connection 15 cm
- Weight 70 kg
- Dimensions 43 X 43 X 88 h
- Efficiency = 76,76%
- Wood consumption = 2,75 Kg/h
- Volume=252 m3
- The stove shall be placed on a flat, flame-retardant surface extending 50 cm at the front and 30 cm at the sides;
- Up to 80 cm of the stove, flammable objects or objects that can be damaged by radiant heat shall not be placed;
- The connectors shall be solidily fixed;
- The exhaust pipe shall be of the same size as the stove attachment;
- It is advisable that the stove has a separate chimney. If other heaters are connected to the same chimney, the size of the chimney must be calculated;
- The combustion process should not be affected by a lack of air to allow proper fume extraction.
- For the first 4/5 use well ventilate the environment for about 40 minutes after ignition, as they will burn the processing oils of the steel;
- Do not open the door except to load the wood when the embers begins to weaken, as this favors the settlement of the paint;
- Use only natural wood;
- Do not load more than 2 / 3 kg of wood every hour;
- It is important that the wood is well dry, preferably preserved for at least 2 years (the humidity of the wood decreases the heat produced during the combustion, in addition it creates water vapour which, condensing, solidifies in the flue and can create a tar compound that can give rise to fires);
- Before lighting the fire, remove the ash from the drawer;
- Place two pieces of wood in the combustion chamber, parallel to each other, above the grate;
- Place a piece of paper in the middle of the lattice, between the two pieces of wood;
- Add some sticks, set the paper on fire and close the door;
- Leave the air valve completely open while the flames fill the combustion chamber;
- The heat is not permanent over time; the duration of a cycle of "recharge" depends on the size of the logs used: the smaller they are, the faster they burn; therefore to achieve long and stable combustion, it is advisable to place the compact strains and at the center of the grate;
- Once the heap is almost all externally burnt, decrease the opening of the valve until the desired combustion is reached;
- The combustion continues with the flames until the wood becomes coal;
- If smoke is created, combustion is not happening properly;
- The glass of the shutter must remain clean and the bricks must keep their normal colour, they must not become black.
- During combustion, the combustion chamber door shall remain closed;
- When adding wood, the valve must be closed;
- Do not touch the embers with your bare hands while it is still hot;
- The ash drawer should be cleaned daily;
- Painted surfaces should be cleaned with a damp cloth, do not use detergents;
- The glass panel shall be cleaned with a damp cloth and, if necessary, washed with a specific detergent;
- Cleaning must be carried out when the stove is completely cold;
- To avoid condensation and possible corrosion, when the stove is not used for a prolonged period, remove ash and wood remnants inside, leave the door open to circulate air;
- Do not tamper with the stove;
- It’s recommended to be installed by a specialist.
Warnings: Ensure that the stove is fully cooled before any maintenance and cleaning operations are carried out.